An update for kernel is now available for openEuler-20.03-LTS-SP4 Security Advisory openeuler-security@openeuler.org openEuler security committee openEuler-SA-2026-3705 Final 1.0 1.0 2026-09-14 Initial 2026-09-14 2026-09-14 openEuler SA Tool V1.0 2026-09-14 kernel security update An update for kernel is now available for openEuler-20.03-LTS-SP4 The Linux Kernel, the operating system core itself. Security Fix(es): In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison The local-vs-remote region comparison loop uses '<=' instead of '<', causing it to read one entry past the valid range of qr_regions. The other loops in the same function correctly use '<'. Fix the loop condition to use '<' for consistency and correctness.(CVE-2026-53309) In the Linux kernel, the following vulnerability has been resolved: ixgbevf: fix use-after-free in VEPA multicast source pruning ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible.(CVE-2026-64113) In the Linux kernel, the following vulnerability has been resolved: sctp: validate STALE_COOKIE cause length before reading staleness When an ERROR chunk with a STALE_COOKIE cause is received in the COOKIE_ECHOED state, sctp_sf_do_5_2_6_stale() reads the 4-byte Measure of Staleness that follows the cause header: err = (struct sctp_errhdr *)(chunk->skb->data); stale = ntohl(*(__be32 *)((u8 *)err + sizeof(*err))); err is the first cause in the chunk, not the STALE_COOKIE cause that caused the dispatch, and nothing guarantees the staleness field is present. sctp_walk_errors() only requires a cause to be as long as the 4-byte header, so for a STALE_COOKIE cause of length 4 the read runs past the cause, and for a minimal ERROR chunk past skb->tail. The value is echoed to the peer in the Cookie Preservative of the reply INIT, leaking uninitialized memory. sctp_sf_cookie_echoed_err() already walks to the STALE_COOKIE cause, so check its length there and pass it to sctp_sf_do_5_2_6_stale(), which reads that cause instead of the first one. A STALE_COOKIE cause too short to hold the staleness field is discarded. The read is reachable by any peer that can drive an association into COOKIE_ECHOED, including an unprivileged process using a raw SCTP socket in a user and network namespace.(CVE-2026-64551) In the Linux kernel, the following vulnerability has been resolved: libceph: fix two unsafe bare decodes in decode_lockers() decode_lockers() in cls_lock_client.c contains two bare decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_32(p) at the num_lockers field has no preceding bounds check. ceph_start_decoding() accepts struct_len=0 as valid -- the internal ceph_decode_need(p, end, 0, bad) always passes -- so when an OSD sends struct_len=0, ceph_start_decoding() returns success with p == end. The immediately following bare ceph_decode_32(p) then reads 4 bytes past the validated buffer boundary. The garbage value is passed directly to kzalloc_objs() as the locker count. The sibling function decode_watchers() in osd_client.c already uses ceph_decode_32_safe() after its own ceph_start_decoding() call. decode_lockers() was the only site using the bare variant. 2. ceph_decode_8(p) after the decode_locker() loop has no preceding bounds check. If an OSD crafts num_lockers such that the loop advances p exactly to end, the subsequent bare ceph_decode_8(p) reads one byte past the validated buffer boundary. The result is passed directly into *type, which is used as a lock type discriminator by callers, giving an OSD-controlled one-byte OOB read with direct influence over the lock type field. Fix both by replacing bare operations with their safe variants: ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers, err_inval) ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type, err_free_lockers) The goto targets differ intentionally: err_inval: is a new label returning -EINVAL directly. It is used for the pre-allocation failure path where *lockers is not yet allocated and must not be passed to ceph_free_lockers(). err_free_lockers: is the existing label. It is used for the post-allocation failure path where *lockers is allocated and must be freed. ret is set to -EINVAL before ceph_decode_8_safe() so that err_free_lockers returns the correct error code on bounds violation. Without this, err_free_lockers would return a stale ret value (0 from the successful decode_locker() loop), silently swallowing the error. -EINVAL is correct for both failure paths. The data received from the OSD is structurally malformed. -ENOMEM would misrepresent the failure class to callers and to stable@ backporters triaging error paths. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition). [ idryomov: trim changelog, formatting ](CVE-2026-68082) In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix possible use after free In dma_release_channel(), check chan->device->privatecnt after call dma_chan_put(). However, dma_chan_put() call dma_device_put() which could release the last reference of the device if the DMA provider is already gone and hence free it. Fixes it by moving dma_chan_put() after the check.(CVE-2026-72476) In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one Free the UAR index returned by the hardware.(CVE-2026-74296) In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix undefined shift of user RQ WQE size set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on the user-provided rq_wqe_shift, which is only checked to be greater than 32, so shifts of 32 are still accepted. A shift of 31 also overflows a signed integer, leading to undefined behavior. Use check_shl_overflow() to compute the RQ WQE size and reject any invalid values.(CVE-2026-74297) In the Linux kernel, the following vulnerability has been resolved: vhost/net: complete zerocopy ubufs only once vhost-net initializes one ubuf_info per outstanding zerocopy TX descriptor and hands it to the backend socket. The networking stack may then clone a zerocopy skb before all skb references are released. For example, batman-adv fragmentation reaches skb_split(), which calls skb_zerocopy_clone() and increments the same ubuf_info refcount. vhost_zerocopy_complete() currently treats every ubuf callback as a completed vhost descriptor. It dereferences ubuf->ctx, writes the descriptor completion state, and drops the vhost_net_ubuf_ref even when the callback only releases a cloned skb reference. A backend reset can therefore wait for and free the vhost_net_ubuf_ref while another cloned skb still carries the same ubuf_info. A later completion then dereferences the freed ubufs pointer. KASAN reports the stale completion as: BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x1d7/0x1f0 BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x101/0x1f0 vhost_zerocopy_complete skb_copy_ubufs __dev_forward_skb2 veth_xmit The freed object was allocated from vhost_net_ioctl() while setting the backend and freed through kfree_rcu()/kvfree_rcu_bulk after backend removal, while delayed skb completion still reached vhost_zerocopy_complete(). Honor the generic ubuf_info refcount before touching vhost state, and run the vhost descriptor completion only for the final ubuf reference. This matches the msg_zerocopy_complete() ownership rule for cloned zerocopy skbs.(CVE-2026-74310) In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve pointer state for commuted arithmetic When scalar += pointer is handled in adjust_ptr_min_max_vals(), the destination register inherits the pointer state from the source pointer. Copying only selected fields is fragile because pointer provenance is tracked by several bpf_reg_state fields. Use the caller's temporary offset register to preserve the scalar operand while replacing the destination with the full pointer state. This preserves the frame number for PTR_TO_STACK registers and keeps parent identity fields consistent.(CVE-2026-74720) In the Linux kernel, the following vulnerability has been resolved: libceph: Avoid using invalid osd indices from primary_temp A corrupted osdmap received from a Ceph monitor or OSD may contain osd indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts that don't exist, i.e., that are greater than max_osd or smaller than CEPH_HOMELESS_OSD (-1). These indices are used to create the up and acting set in ceph_pg_to_up_acting_osds(), called from calc_target(). While most of these osd indices are checked, the one from primary_temp is not. Subsequently, this may lead to calc_target() returning this (potentially invalid) index as target osd for a (linger) request. Because the osd_state, osd_weight, and osd_addr arrays only contain max_osd entries (with indices 0 to max_osd -1), this leads to out-of-bounds accesses when trying to read values from these arrays. This patch fixes the issue by adding a check to get_temp_osds(), so that only valid osd indices from primary_temp are used, and it falls back to using the primary from pg_temp or the up set if it is invalid. [ idryomov: changelog ](CVE-2026-80558) An update for kernel is now available for openEuler-20.03-LTS-SP4/openEuler-22.03-LTS-SP3/openEuler-24.03-LTS/openEuler-24.03-LTS-SP2. openEuler Security has rated this update as having a security impact of critical. A Common Vunlnerability Scoring System(CVSS)base score,which gives a detailed severity rating, is available for each vulnerability from the CVElink(s) in the References section. Critical kernel https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-3705 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-53309 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-64113 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-64551 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-68082 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-72476 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-74296 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-74297 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-74310 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-74720 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2026-80558 https://nvd.nist.gov/vuln/detail/CVE-2026-53309 https://nvd.nist.gov/vuln/detail/CVE-2026-64113 https://nvd.nist.gov/vuln/detail/CVE-2026-64551 https://nvd.nist.gov/vuln/detail/CVE-2026-68082 https://nvd.nist.gov/vuln/detail/CVE-2026-72476 https://nvd.nist.gov/vuln/detail/CVE-2026-74296 https://nvd.nist.gov/vuln/detail/CVE-2026-74297 https://nvd.nist.gov/vuln/detail/CVE-2026-74310 https://nvd.nist.gov/vuln/detail/CVE-2026-74720 https://nvd.nist.gov/vuln/detail/CVE-2026-80558 openEuler-20.03-LTS-SP4 bpftool-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm bpftool-debuginfo-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm kernel-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm kernel-debuginfo-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm kernel-debugsource-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm kernel-devel-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm kernel-source-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm kernel-tools-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm kernel-tools-debuginfo-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm kernel-tools-devel-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm perf-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm perf-debuginfo-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm python2-perf-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm python2-perf-debuginfo-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm python3-perf-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm python3-perf-debuginfo-4.19.90-2609.1.0.0389.oe2003sp4.aarch64.rpm bpftool-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm bpftool-debuginfo-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm kernel-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm kernel-debuginfo-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm kernel-debugsource-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm kernel-devel-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm kernel-source-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm kernel-tools-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm kernel-tools-debuginfo-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm kernel-tools-devel-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm perf-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm perf-debuginfo-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm python2-perf-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm python2-perf-debuginfo-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm python3-perf-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm python3-perf-debuginfo-4.19.90-2609.1.0.0389.oe2003sp4.x86_64.rpm kernel-4.19.90-2609.1.0.0389.oe2003sp4.src.rpm In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison The local-vs-remote region comparison loop uses '<=' instead of '<', causing it to read one entry past the valid range of qr_regions. The other loops in the same function correctly use '<'. Fix the loop condition to use '<' for consistency and correctness. 2026-09-14 CVE-2026-53309 openEuler-20.03-LTS-SP4 Critical 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-3705 In the Linux kernel, the following vulnerability has been resolved: ixgbevf: fix use-after-free in VEPA multicast source pruning ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible. 2026-09-14 CVE-2026-64113 openEuler-20.03-LTS-SP4 Critical 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-3705 In the Linux kernel, the following vulnerability has been resolved: sctp: validate STALE_COOKIE cause length before reading staleness When an ERROR chunk with a STALE_COOKIE cause is received in the COOKIE_ECHOED state, sctp_sf_do_5_2_6_stale() reads the 4-byte Measure of Staleness that follows the cause header: err = (struct sctp_errhdr *)(chunk->skb->data); stale = ntohl(*(__be32 *)((u8 *)err + sizeof(*err))); err is the first cause in the chunk, not the STALE_COOKIE cause that caused the dispatch, and nothing guarantees the staleness field is present. sctp_walk_errors() only requires a cause to be as long as the 4-byte header, so for a STALE_COOKIE cause of length 4 the read runs past the cause, and for a minimal ERROR chunk past skb->tail. The value is echoed to the peer in the Cookie Preservative of the reply INIT, leaking uninitialized memory. sctp_sf_cookie_echoed_err() already walks to the STALE_COOKIE cause, so check its length there and pass it to sctp_sf_do_5_2_6_stale(), which reads that cause instead of the first one. A STALE_COOKIE cause too short to hold the staleness field is discarded. The read is reachable by any peer that can drive an association into COOKIE_ECHOED, including an unprivileged process using a raw SCTP socket in a user and network namespace. 2026-09-14 CVE-2026-64551 openEuler-20.03-LTS-SP4 Critical 9.1 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H kernel security update 2026-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-3705 In the Linux kernel, the following vulnerability has been resolved: libceph: fix two unsafe bare decodes in decode_lockers() decode_lockers() in cls_lock_client.c contains two bare decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_32(p) at the num_lockers field has no preceding bounds check. ceph_start_decoding() accepts struct_len=0 as valid -- the internal ceph_decode_need(p, end, 0, bad) always passes -- so when an OSD sends struct_len=0, ceph_start_decoding() returns success with p == end. The immediately following bare ceph_decode_32(p) then reads 4 bytes past the validated buffer boundary. The garbage value is passed directly to kzalloc_objs() as the locker count. The sibling function decode_watchers() in osd_client.c already uses ceph_decode_32_safe() after its own ceph_start_decoding() call. decode_lockers() was the only site using the bare variant. 2. ceph_decode_8(p) after the decode_locker() loop has no preceding bounds check. If an OSD crafts num_lockers such that the loop advances p exactly to end, the subsequent bare ceph_decode_8(p) reads one byte past the validated buffer boundary. The result is passed directly into *type, which is used as a lock type discriminator by callers, giving an OSD-controlled one-byte OOB read with direct influence over the lock type field. Fix both by replacing bare operations with their safe variants: ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers, err_inval) ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type, err_free_lockers) The goto targets differ intentionally: err_inval: is a new label returning -EINVAL directly. It is used for the pre-allocation failure path where *lockers is not yet allocated and must not be passed to ceph_free_lockers(). err_free_lockers: is the existing label. It is used for the post-allocation failure path where *lockers is allocated and must be freed. ret is set to -EINVAL before ceph_decode_8_safe() so that err_free_lockers returns the correct error code on bounds violation. Without this, err_free_lockers would return a stale ret value (0 from the successful decode_locker() loop), silently swallowing the error. -EINVAL is correct for both failure paths. The data received from the OSD is structurally malformed. -ENOMEM would misrepresent the failure class to callers and to stable@ backporters triaging error paths. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition). [ idryomov: trim changelog, formatting ] 2026-09-14 CVE-2026-68082 openEuler-20.03-LTS-SP4 Critical 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-3705 In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix possible use after free In dma_release_channel(), check chan->device->privatecnt after call dma_chan_put(). However, dma_chan_put() call dma_device_put() which could release the last reference of the device if the DMA provider is already gone and hence free it. Fixes it by moving dma_chan_put() after the check. 2026-09-14 CVE-2026-72476 openEuler-20.03-LTS-SP4 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-3705 In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one Free the UAR index returned by the hardware. 2026-09-14 CVE-2026-74296 openEuler-20.03-LTS-SP4 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-3705 In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix undefined shift of user RQ WQE size set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on the user-provided rq_wqe_shift, which is only checked to be greater than 32, so shifts of 32 are still accepted. A shift of 31 also overflows a signed integer, leading to undefined behavior. Use check_shl_overflow() to compute the RQ WQE size and reject any invalid values. 2026-09-14 CVE-2026-74297 openEuler-20.03-LTS-SP4 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-3705 In the Linux kernel, the following vulnerability has been resolved: vhost/net: complete zerocopy ubufs only once vhost-net initializes one ubuf_info per outstanding zerocopy TX descriptor and hands it to the backend socket. The networking stack may then clone a zerocopy skb before all skb references are released. For example, batman-adv fragmentation reaches skb_split(), which calls skb_zerocopy_clone() and increments the same ubuf_info refcount. vhost_zerocopy_complete() currently treats every ubuf callback as a completed vhost descriptor. It dereferences ubuf->ctx, writes the descriptor completion state, and drops the vhost_net_ubuf_ref even when the callback only releases a cloned skb reference. A backend reset can therefore wait for and free the vhost_net_ubuf_ref while another cloned skb still carries the same ubuf_info. A later completion then dereferences the freed ubufs pointer. KASAN reports the stale completion as: BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x1d7/0x1f0 BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x101/0x1f0 vhost_zerocopy_complete skb_copy_ubufs __dev_forward_skb2 veth_xmit The freed object was allocated from vhost_net_ioctl() while setting the backend and freed through kfree_rcu()/kvfree_rcu_bulk after backend removal, while delayed skb completion still reached vhost_zerocopy_complete(). Honor the generic ubuf_info refcount before touching vhost state, and run the vhost descriptor completion only for the final ubuf reference. This matches the msg_zerocopy_complete() ownership rule for cloned zerocopy skbs. 2026-09-14 CVE-2026-74310 openEuler-20.03-LTS-SP4 Critical 9.3 AV:L/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H kernel security update 2026-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-3705 In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve pointer state for commuted arithmetic When scalar += pointer is handled in adjust_ptr_min_max_vals(), the destination register inherits the pointer state from the source pointer. Copying only selected fields is fragile because pointer provenance is tracked by several bpf_reg_state fields. Use the caller's temporary offset register to preserve the scalar operand while replacing the destination with the full pointer state. This preserves the frame number for PTR_TO_STACK registers and keeps parent identity fields consistent. 2026-09-14 CVE-2026-74720 openEuler-20.03-LTS-SP4 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-3705 In the Linux kernel, the following vulnerability has been resolved: libceph: Avoid using invalid osd indices from primary_temp A corrupted osdmap received from a Ceph monitor or OSD may contain osd indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts that don't exist, i.e., that are greater than max_osd or smaller than CEPH_HOMELESS_OSD (-1). These indices are used to create the up and acting set in ceph_pg_to_up_acting_osds(), called from calc_target(). While most of these osd indices are checked, the one from primary_temp is not. Subsequently, this may lead to calc_target() returning this (potentially invalid) index as target osd for a (linger) request. Because the osd_state, osd_weight, and osd_addr arrays only contain max_osd entries (with indices 0 to max_osd -1), this leads to out-of-bounds accesses when trying to read values from these arrays. This patch fixes the issue by adding a check to get_temp_osds(), so that only valid osd indices from primary_temp are used, and it falls back to using the primary from pg_temp or the up set if it is invalid. [ idryomov: changelog ] 2026-09-14 CVE-2026-80558 openEuler-20.03-LTS-SP4 Critical 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2026-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2026-3705